Sapen International
Fibre Range
Sapen International
- 0086-21-5995-1500
- chris@sapenfibre.com
- No. 2771, Jiahang road, Jiading, Shanghai, China
Choose website
- 0086-21-5995-1500
- info@sapenfibre.com
Choose website
Fibre Range
Macro
Macro Synthetic Polypropylene Fibre
Macro
Macro Synthetic Polypropylene Fibre
This fibre is made of 100% virgin Polypropylene which is an engineered thermoplastic polymer, characterised by durability, flexibility and resistance to heat and acids. Macro fibre is suitable for engineering structural applications, such as municipal road bricks, floors, tunnel shotcrete, mining tunnels, precast segments, water conservancy and hydropower engineering, etc. They are used to prevent concrete cracking, improve impact toughness, fatigue resistance, and enhance concrete durability, waterproofing, fire resistance, and explosion-proof functions, and can be used in corrosive environments.
Technical Data
| Tensile Strength | ≥650MPa |
| Elastic Modulus | ≥10GPa |
| Fibre dimension | L: 30mm/47 mm/55 mm/65 mm, T: 0.50-0.60 mm, W: 1.20–1.40 mm, Equivalent Diameter: 0.8-1.0 mm Length can be customised |
| Melting Point | 165-175℃ |
| Density | 0.91 g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Moisture Content | 0% |
| Appearance | White, transparent, grey, black, embossed |
| Safety | Non-toxic, non-irritating, neutral |
Micro
Micro Monofilament Polypropylene
Micro
Micro Monofilament Polypropylene Fibre
This fibre is made of 100% virgin Polypropylene, also used to manufacture our macro synthetic polypropylene fibre. Micro fibre is suitable for various construction engineering applications, such as highways, bridges, floors, tunnel shotcrete, mining tunnels, prefabricated components, water conservancy and hydropower, civil construction engineering, etc. It is used to prevent early plastic shrinkage cracking of cement, mortar, and concrete, improve impact toughness, fatigue resistance, enhance concrete durability, enhance concrete waterproofing, fire resistance, and explosion-proof functions, and can be used in corrosive environments.
Technical Data
| Minimum Tensile Strength | ≥ 600 MPa |
| Elastic Modulus | ≥ 6000 MPa |
| Fibre dimension | L: 6 mm/12 mm/18 mm Diameter：20-40μm Dimension can be customised |
| Melting Point | 165-175℃ |
| Density | 0.91 g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Moisture Content | ≤ 0.5% |
| Appearance | White, bundled monofilament |
| Safety | Non-toxic, non-irritating, neutral |
Polyoxymethylene
Polyoxymethylene Fibre
Polyoxymethylene
Polyoxymethylene Fibre
This fibre is made of Polyoxymethylene, a thermoplastic characterised by high strength, hardness and rigidity to −40 °C. This fibre has undergone special surface treatment and has excellent dispersibility. It has good bonding performance with cement-based materials and can effectively suppress microcracks. It is particularly suitable for high-strength concrete and ultra-high performance concrete, significantly improving the flexural strength, crack resistance, impact wear resistance, and fire and explosion resistance of the matrix.
Technical Data
| Fibre dimension | D: 0.2 mm; L: 6/12 mm |
| Tensile Strength | > 1000 MPa |
| Elastic Modulus | ≥ 12 GPa |
| Density | 1.4 g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Moisture Content | ≤ 0.1% |
| Appearance | Transparent monofilament |
| Safety | Non-toxic, non-irritating, neutral |
Polyvinyl Alcohol
Polyvinyl Alcohol Fibre
Polyvinyl Alcohol
Polyvinyl Alcohol Fibre
This fibre is made of polyvinyl alcohol (PVA) PVA fibre is a synthetic fibre produced from PVOH resin as raw material. It has characteristics such as high strength, high modulus, low elongation, alkali resistance, weather resistance, and hydrophilicity. It has good affinity and binding with substrates such as cement and gypsum, and is non-toxic, pollution-free, and does not harm human skin. It is harmless to the human body and is one of the new generation of green building materials. This product can replace asbestos as a reinforcement and crack prevention material for cement and concrete. This fibre is very suitable for Engineered Cementitious Composites(ECC)
Technical Data
| Tensile Strength | ＞1500 MPa |
| Elastic Modulus | ＞37 GPa |
| Fibre dimension | L: 6mm/12mm Diameter：20-40μm |
| Melting Point | 230℃ |
| Density | 1.3 g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Reduction in 90℃ water | ≤ 1% |
| Appearance | Faint yellow monofilament |
| Safety | Non-toxic, non-irritating, neutral |
Macro
Macro Synthetic Polypropylene Fibre
This fibre is made of Polypropylene which is an engineered thermoplastic polymer, characterised by durability, flexibility and resistance to heat and acids.
Technical Data
| Minimum Tensile Strength | ≥ 600 MPa |
| Modulus | ≥ 10 GPa |
| Fibre dimension | L: 47mm / 55mm / 65mm, T: 0.50-0.60mm, W: 1.20 – 1.40mm Length can be customised |
| Melting Point | 170℃ |
| Density | 0.91 g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Moisture Content | ≤ 0% |
| Appearance | White, Transparent, Grey, Embossed |
| Safety | Non-toxic, Non-irritating, Neutral |
Micro
Micro Monofilament Polypropylene Fibre
This fibre is made of Polypropylene, also used to manufacture our macro synthetic polypropylene fibre. Typical applications include tunnels, subway, pier, highways, viaduct, power station, airport, high-speed railway, basement, parking ground, swimming pool etc.
Technical Data
| Tensile Strength | ≥ 600 MPa |
| Modulus | ≥ 6000 MPa |
| Fibre dimension | Length: 6mm / 12mm / 18mm (+/-5%); Diameter:16-18μm |
| Melting Point | 170℃ |
| Ignition | 539℃ |
| Density | 0.91g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Appearance | White, bundled monofilament |
| Safety | Non-toxic, non-irritating, neutral |
POM
Polyoxymethylene Fibre
This fibre is made of Polyoxymethylene, a thermoplastic characterised by high strength, hardness and rigidity to −40 °C. Typical applications include building decoration exterior walls, ultra high performance concrete (UHPC) carved artwork, cement flower pot products, municipal road bricks etc.
Technical Data
| Fibre dimension | D: 0.2 mm; L:6 / 12mm |
| Minimum Tensile Strength | >1000 MPa |
| Modulus | >12 GPa |
| Density | 1.4 g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Moisture Content | ≤0.1% |
| Appearance | Transparent or white monofilament |
| Safety | Non-toxic, non-irritating, neutral |
PVA
Polyvinyl alcohol Fibre
This fibre is made of polyvinyl alcohol or PVA which is a fossil-based water soluble biodegradable polymer, characterised by good transparency, lustre, antielectrostatic properties, chemical resistance, and toughness. Typical applications include tunnels, subways, piers, highway, viaduct, power stations, airports, high-speed railways, basements, parking grounds, swimming pools etc.
Technical Data
| Tensile Strength | ＞1500 MPa |
| Modulus | ＞37GPa |
| Elongation | 6.5±1% |
| Fibre dimension | Length: 12mm ; Diameter: 40μm |
| Melting Point | 230℃ |
| Density | 1.3g/cm3 |
| Acid & Alkali Resistance | Excellent |
| Reduction in 90℃ water 90 | ≤1% |
| Appearance | Faint yellow |
| Safety | Non-toxic, non-irritating, neutral |
